specification control drawing 300 constitution drive menlo park, ca 94025, usa thermofit devices title: (105c) soldersleeve low temperature unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: d-142-50/-51/-52 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d000400 replaces: n/a drawn by: m. foronda date: 17-jul-00 prod. rev. see table doc issue: 2 scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. product revisions product dimensions cable dimensi ons product name nas equiv. l ? 1.52 (l0.06) b min c min d max e min d-142-50 j 1745-14 15.75 (0.620) 2.80 (0.110) 3.175 (0.125) 3.175 (0.125) 1.40 (0.055) d-142-51 j 1745-15 15.75 (0.620) 4.45 (0.175) 5.08 (0.200) 5.08 (0.200) 2.54 (0.100) d-142-52 j 1745-16 19.05 (0.750) 7.11 (0.280) 7.62 (0.300) 7.62 (0.300) 4.06 (0.160) materials 1. insulation sleeve: heat shrinkable, radiation cr oss-linked polyvinylidene fluoride. color: natural. 2. solder preform with flux: solder: type cd18 per ansi j-std-006. flux: type rol1 per ansi j-std-004. 3. meltable rings: thermally stabilized thermoplast ic, one clear and one blue. application 1. these parts are designed for shield terminations on cables having tin or silver plated shields and insulations rated for at least 105 ? c and falling within size range listed. 2. these parts are designed to meet the requirement s of raychem specification rt-1404. they also comply with national aerospace standard part d rawing nas-1745. see table above for equivalent size. 3. for installation techniques, see raychem assembl y procedure rcps 100-70. 4. for other sizes available in this configuration, see raychem devices specification control drawings d-142-56, -65 & -66. for best results, prepare the cable as shown:
|
